The Mercedes-Benz Sprinter Chassis in the BASE equipment line.

BASE

The key features:

  • Electrically adjustable, heated exterior mirrors
  • Extended mirror bracket
  • 16" Steel wheels
  • Active Brake Assist
  • Pre-wiring reversing camera with interior mirror display
  • Pre-installation: Blind Spot Assist
  • Crosswind Assist
  • Active Lane Keeping Assist
  • Headlight assistant
  • Hill-Start Assist
  • Rain sensor
The cab of the Mercedes-Benz Sprinter Chassis in the BASE equipment line.

BASE

The key features:

  • MBUX multimedia system with 26 cm (10.25-inch) touchscreen
  • Multifunction steering wheel
  • Height and rake adjustable steering wheel
  • Instrument cluster with colour display
  • Co-driver’s double seat
  • Comfort overhead control panel
  • USB socket, 5 V
  • Stowage compartment underneath cockpit
  • Shelf above windscreen
  • Co-driver airbag
The controls for the electric hot-air auxiliary heater in the Mercedes-Benz Sprinter Chassis.

Electric hot-air auxiliary heater

The electric hot-air auxiliary heater pampers driver and passengers with cosy warmth right after the engine is started. The heater warms up incoming air in front of the air vents, so that a comfortable feel-good atmosphere can be quickly enjoyed in the vehicle interior even on cold days.

The controls for the electrically adjustable driver's seat in the Mercedes-Benz Sprinter Chassis.

Electrically adjustable front seats

The electrically adjustable seat can be adjusted to individual comfort requirements at the touch of a button. The fore/aft position of the seat, the seat height as well as the angle of the backrest and the seat cushion are power-adjustable.

The driver's and co-driver's seats with lumbar support in the Mercedes-Benz Sprinter Chassis.

Lumbar support for driver and front passenger seat

The lumbar support in the backrest of the seat allows individual adjustment to the ergonomic comfort needs of the driver or front passenger. Both air bladders are adjusted pneumatically. The height of the cushions and the degree of curvature can be controlled via a 4-way switch button on the outside of the seat.

The rear-view mirror display of the reversing camera in the Mercedes-Benz Sprinter Chassis.

Pre-installation for reversing camera with display in the inside rear-view mirror

The reversing camera makes the area directly behind the vehicle, which cannot be directly seen without a camera, visible in a display in the inside rear-view mirror. It thus supports parking and manoeuvring – especially in confined spaces – and can help to prevent damage to the vehicle.

The MBUX multimedia system in the Mercedes-Benz Sprinter Chassis.

MBUX multimedia system

With MBUX (Mercedes-Benz User Experience), you get an intelligent and expandable multimedia system. Its various interfaces and high-resolution touchscreen offer numerous communication and infotainment functions.

Navigation in the MBUX multimedia system of the Mercedes-Benz Sprinter Chassis.

Navigation

Save time thanks to fast hard-disc Navigation with flexible input via touch control or voice input. This intelligent system guides you to your destination reliably, drawing on both local and up-to-date online information.

The screen view of the Smartphone Integration in the Mercedes-Benz Sprinter Chassis.

Smartphone Integration Package

Smartphone Integration connects your mobile phone with the multimedia system via Apple CarPlay® or Android Auto®,  giving you convenient access to the most important apps on your smartphone. And you can also quickly and easily use third-party apps such as Spotify.

The 9G-TRONIC automatic transmission of the Mercedes-Benz Sprinter Chassis.

9G-TRONIC

The 9G-TRONIC automatic transmission has nine gears which keep the engine speed as low as possible in every driving situation. The wide transmission ratio spread optimises the agility and pulling power of the vehicle in all operating states and improves the ability to move off.

The rear-axle spring made of GFRP of the Mercedes-Benz Sprinter Chassis.

Rear axle spring made from glass-fibre-reinforced plastic

The suspension is equipped with a rear-axle suspension made of glass-fibre-reinforced plastic that is lighter than a steel suspension. It reduces the vehicle weight and increases the payload or load capacity by up to 12 kg.

The Mercedes-Benz Sprinter Chassis in reinforced rough-road specification.

Reinforced rough-road version

The reinforced rough-road version is recommended when the vehicle is regularly used in construction transport or in forestry and agriculture. It is designed for driving on poor roads with potholes or on unpaved and gravel roads.

The Mercedes-Benz Sprinter Chassis with suspension for comfort and load protection.

Suspension for comfort and cargo protection

The suspension for comfort and load protection receives specifically tuned shock absorbers as well as additional springs and rubber bearings.

The gearshift lever for the 6-speed manual transmission in the Mercedes-Benz Sprinter Chassis.

6-speed manual transmission

The 6-speed manual transmission combines high shifting and driving comfort with efficiency and agile handling. The operation via the gearshift lever is effortless and largely free of vibrations. The gear changes are smooth. Thanks to the large overall ratio of the transmission, the engine speeds remain as low as possible in all driving situations.

Two Mercedes-Benz vans on a construction site.

Mercedes-Benz ServiceCare for vans

Your van is an engine for your success. If it is up and running, so is your business. With Service Contracts from Mercedes-Benz you can ensure that it stays that way. Find out which Mercedes-Benz ServiceCare product is best for your needs.

A Mercedes-Benz van in service operations.

Mercedes-Benz Service24h and MobiloVan

If your vehicle should ever suffer a breakdown, the professional Mercedes-Benz Service24h will help you reach your destination. With the Mercedes-Benz MobiloVan mobility guarantee this and other useful services are a part of every new Mercedes-Benz van.